- #2014 ford expedition navigation system how to#
- #2014 ford expedition navigation system install#
- #2014 ford expedition navigation system driver#
This 2007-2010 Ford Expedition car stereo is running on the latest Android 11.0 and a powerful RK3188 1.5 GHz Cortex A9 8-core processor, which can provide fast response and a stable operation for you. Still find it too hard and not sure what to go with? Please go to a car stereo upgrade center directly to have the radio installed by a mechanic.
#2014 ford expedition navigation system install#
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.īy now you should have some idea of what is involved in removing and installing a new car stereo in a 2007-2010 Ford Expedition. If you have questions during this process, you can ask your dealer or professional for help. Step 12: Turn on the new Seicane stereo and check whether the radio is working properly.
Step 11: Connect the Seicane stereo to your original car radio’s plugs, and put the new Seicane stereo into the dash. Connect the harnesses to the back of the new Seicane stereo Step 10: Connect the harnesses to the back of the new Seicane stereo. Check all the accessories for the new Seicane stereo Step 9: Check all the accessories for the new Seicane stereo. Remove screws securing radio to the vehicle, and take the original radio out of the dash Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash. Step 7: Remove the radio bezel and AC controls. Step 6: Unplug AC controls (from passenger side). Remove bolts securing radio bezel and AC controls Step 5: Remove bolts securing radio bezel and AC controls.
#2014 ford expedition navigation system driver#
Remove console side panels on both driver and passenger sides Step 4: Remove console side panels on both driver and passenger sides. Remove screws securing center console lid with a screwdriver
Step 2: Remove screws securing center console lid with a screwdriver. Step 1: Remove the trim around gear shifter.
Suppose you are are the owner of 2007-2010 Ford Expedition, what will you do when you start to upgrade your new car radio system? Here are some steps that can help you to finish these complex procedures.īefore and during installation, you should notice:ġ.Before connecting, please make sure the ignition is off to avoid short circuit.Ģ.Ensure connect the yellow and red power cable at last.ģ.Ensure that all loose wires are isolated with electrical tapeĤ.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).ĥ.Ensure that all ground is connected to the same place.Ħ.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.Ģ007-2010 Ford Expedition head unit installation instruction Thus it is important to get the right skills of installation.
#2014 ford expedition navigation system how to#
However, some people may still wonder how to install it correctly. According to the new statistics, the number of car radio with Carplay owner has been increased to more than 40 million this year. Nowadays, more and more people prefer to use Carplay on their drive way.